1-800-334-1001

 

Email Us Credit App Repair Form

Menu
image

FLUID DELIVERY ~ BINKS

  • TANKS & PRESSURE CUPS

  • AIR SPRAY PISTON PUMPS

  • AIR SPRAY DIAPHRAGM PUMPS

  • AIR-ASSISTED & AIRLESS PISTON PUMPS

Binks A.S.M.E. code tanks meet OSHA regulations when using flammable and combustible materials. Stainless steel, galvanized or zinc-plated tanks are designed for use with a variety of solvent and waterborne coatings. Reusable tank liners offer easy clean up for rapid color change and refill requirements.

PT Tanks

ASME certification makes the Binks PT Series the only economical code tanks available in the marketplace that meet OSHA regulations for using flammable and combustible materials. 

Galvanized Tanks

Galvanized steel tanks are primarily used with non-corrosive materials. Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tanks are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. The bottom outlet is recommended for heavy, viscous materials such as emulsified asphalts, cutback asphalts, rubber compounds, etc.

Stainless Steel Tanks

Stainless Steel Pressure Tanks are suitable for virtually all fluids and solvents. They are ASME certified and permanently labeled for 110 PSIG maximum working pressure. Tanks and lids are constructed of heavy gauge 304 stainless steel and are also electro polished. All models are equipped with top outlet and bottom outlet plug, which can be adapted for bottom outlet. Additionally, these tanks are fitted with 100% stainless steel non-corrosive and non-corroding wetted parts.  

Pressure Cups

A pressure cup can have a 1 or 2 qt. capacity and are closed containers. They provide a constant flow of material, under constant pressure, to the spray gun. 

 

Binks piston pumps are designed for a variety of coatings and materials, and deliver the pressure and flow requirements for a diverse number of applications.

Low Pressure Maple Pumps

Designed for recirculating and non circulating systems, the Maple 3:1 pump is available in models that range from 375 cc/.1 gal per minute to 1,500 cc/.4 gal displacement per cycle. The versatile pump is also available in a piggable configuration and sanitary connections.

POGO Plus Pump

Binks Pogo Plus series two-ball double acting piston pumps are designed for the application and transfer of low-medium viscosity fluids.

NEW! Smart Pumps Electric Drive

The New Binks Smart Electric Pump is designed to operate at much lower cost than compressed air driven models. When used with an optional smart card, higher savings can be realized by running in an open or closed loop mode which delivers the paint when needed to the user point at the correct pressure and volume.

 

Binks diaphragm pumps are designed for a variety of coatings and materials, and deliver the pressure and flow requirements for a diverse number of applications.

Diaphragm Pumps - Gemini I

Diaphragm pumps can serve several purposes in a spray system. They can be used as a transfer pump to move coatings from one container to another (i.e. drum to a pressure pot). In many cases larger diaphragm pumps can be used in a paint supply room to supply pressure to low pressure spray guns either in a dead-end system or a circulating system.

DX70 Air Operated 1:1 Ratio Diaphragm Pump

The pump features a unique diaphragm no-crease shape for a long life. The DX-70 also includes a built in fluid regulator which ensures a constant and virtually pulse free fluid delivery for direct feed to spray guns. This design reduces the cost and complexity of additional fluid regulators or surge chambers.

Binks piston pumps are designed for a variety of coatings and materials, and deliver the pressure and flow requirements for a diverse number of applications.

NEW! MX Heavy Duty Series Pumps

When it comes to tough finishing applications, Binks provides heavy duty pumping power and fluid delivery capacity for airless and air assist airless applications.

NEW! Medium Pressure Maple Pumps

New medium pressure Maple pump models for recirculating and non circulating systems, ranging from 166 cc/.04 gal to 200 cc/.05 gal displacement per cycle.

MX Medium Pressure Pumps

Binks MX pumps operate at 12:1 and 32:1 ratio delivering 0.4 GPM or 1.2 GPM at 60 cycles per minute. Panel-mounted control gauges make the Binks MX comfortable to operate. Stainless steel wetted parts make the MX versatile in coating choices from solvent to water-based materials. Modular construction with dependable quality parts guarantee high performance and easy maintenance.

Infinity 2 - Ball Piston Pumps

Infinity UltraCoat™ Piston Pumps feature ceramic coated cylinders and piston rods. Infinity UltraCoat provides the waterborne benefits of stainless steel with the abrasion-resistance of ceramic coating for maximum pump packing endurance and reduced wear-part abrasion and scoring.

 

Do you have a question or need application assistance?