1-800-334-1001

 

Email Us Credit App Repair Form
Menu

Drum Rotators - "Corner-Over-Corner"

Drum Tumblrs™

 

Morse Drum Tumblers rotate a drum "corner-over-corner" to thoroughly mix drum contents. A plastic drum, steel drum, or fiber drum. . . One drum mixer to blend them all!

 

 

 

  • Agitate drum contents without even opening it
  • Prevent hazards, worker exposure, and messy cleanup of insertion mixers
  • Incorporate settled ingredients
  • Homogenize valuable products
  • Eliminate sediment at the bottom of a drum


drum tumbler

drum tumbler

image

Load upright drum with your hoist or craneback

Easy to load a drum with your hoist to avoid the hazards of manual drum handling.

Quickly load an upright drum into the Drum Tumbler with Morse model 92 Below-Hook Drum Lifter and your hoist or crane.

image

Load upright drum with your forkliftback

Easy to load a drum with your hoist to avoid the hazards of manual drum handling.

Quickly load an upright drum into the Drum Tumbler with Morse model 92 Below-Hook Drum Lifter, your forklift, and a model 284 Fork Hook.

image

Tumble Many Different Drums, including 55-gallon and 30-gallon drum sizes

Drum Holder on Drum Tumblers supports your drum on a base plate under the drum, two clamps on top of the drum, and web strap and ratchet around drum.

 

 

 

 

 

 

  • Tumble drum 29" to 37" (74 to 94 cm) tall
  • Tumble drum 18" to 23.5" (46 to 60 cm) in diameter
  • Drum RPM
    • Model 309-3: 14 RPM or Variable Speed 2 to 20 RPM with Morse Control Package
    • Model 309-A Air Powered Drum Tumbler: 14 RPM, and variable with air flow and pressure
    • Explosion proof 60Hz Drum Tumbler: 14 RPM
    • Explosion proof 50Hz Drum Tumbler: 12 RPM
  • Motor is 1 HP
  • Capacity:
    • 800 Lb. (363 kg) full drum
    • 400 Lb. (181 kg) half-full drum
      Half-full Capacity is an indication of the capacity for tilting an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. 

OPTIONS

Morse Control Packages
(sold separately)

Include a Control Mast and the appropriate Control Box for each model. Use power controls to start and stop drum tumbling. The control mast can be positioned outside the safety enclosure on either the left or right side, or at the back of Drum Tumbler.

image

AC Control Packages
NEMA 4/12 for NON-Hazardous Areas (sold separately)

Includes Control Mast and Control Box with:

  • Timer adjusts from a few seconds to 16 hours
  • Start and Stop Buttons
  • Variable Speed - Control drum rotation from 2 to 20 RPM
  • Red Emergency Stop Button
  • Lockable Fused Disconnect to shut off and lock out power to the unit
  • 24V DC Control Supply
  • Wire terminals for external connection of safety interlock switch
image

Explosion Proof AC Control Packages
NEMA 7/9 for Hazardous Areas (sold separately)

Includes Control Mast and Control Box with:

  • Start and Stop Buttons
  • Run / Jog Selector Switch
image

Safety Enclosures with Safety Interlock
to Meet OSHA Requirements

Morse enclosures with safety interlock are available as a way to meet OSHA requirements. Drum Tumbler and Control Package sold separately.

Enclosure outside post-to-post dimensions:
L76" x W52" x H63.25" (193 x 132 x 161 cm)


Install all Morse Rotators in accordance with local requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

 

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

Do you have a question or need application assistance?