1-800-334-1001

 

Email Us Credit App Repair Form

Menu

BOOTH ACCESSORIES

  • FLOOR PAPER

  • BOOTH COATINGS

  • MEDIA SUPPORT & CONVERSION GRIDS

  • MANOMETERS

  • LIGHT FILM

  • BOOTH LIGHTING

  • OTHER ACCESSORIES

MEDIA SUPPORT & CONVERSION GRIDS

Research Products

image
floor paper

Series Mark II Molded Plastic Manometer

3% Accuracy for Stationary and Portable Applicationsfloor paper

Dwyer® Mark II series molded manometers are of the inclined and inclined-vertical types. The curved inclined-vertical tube of the Model 25 gage provides higher ranges with more easily read increments at low readings. The Model 25 is excellent for general purpose work. The Model 40 inclined gage provides linear calibration and excellent resolution throughout its range. The Model 40 is ideally suited for air velocity and air filter gage applications. Both gage types are capable of pressure measurements above and below atmospheric as well as differential pressure measurements.

Dwyer Manometer Brochure

Features

  • Construction - Mark II Manometers are economically priced, compact and available in both stationary and portable configurations. Portable stand is standard on Model 40, available as optional A-612 stand for Model 25. Construction is simple with virtually indestructible molded white styrene-acrylonitrile housing, indicating tube and fluid wells, molded ABS knobs and zero adjust plunger, shock mounted glass level vial and leak proof "O" ring seals. Moderate overpressures are accommodated by an overflow tank incorporated in the Model 25. Greater protection is provided by float operated overflow traps in the Model 40. Scales are lithograph printed on aluminum and epoxy coated.
  • Installation - Mark II Manometers can be mounted on any vertical surface with the two mounting screws provided. A built-in spirit level simplifies leveling before mounting screws are tightened. Simply fill the reservoir, adjust fluid level to zero, connect the tubing, and the gage is ready for operation.
  • Accessories - Included with each Mark II manometer are two tubing connectors for 1/8" pipe or sheet metal ducts, two mounting screws, 1 ounce bottle of indicating fluid, red and green pointer flags and complete instructions.
    The Model 25 also includes 8' of flexible double column plastic tubing. Portable operation of the Model 25 is made possible by the use of the optional A-612 portable stand. A short piece of tubing can be slipped over the Model 25 pressure connections to contain the gage fluid in transit.
    The Model 40 contains two 4-1/2' lengths of clear plastic tubing, a plastic swing-out stand and leveling screw for portable operation. It also features convenient rapid shutoff pressure connections and integral overpressure safety traps.

Protective Lens Film for Spray Booths

floor paper

Product Overview

3 Mil plastic with acrylic adhesive

Lens Protection Roll:

Protects lens coverings from overspray
Applies easily to clean lens
Available In 12” & 18” widths
100 Feet per roll

12” Film - Part Number: 3263
Single Roll or Case of 4

18” Film - Part Number: 3188
Single Roll or Case of 2

25” Film - Part Number: 4348
Single Roll
NOTE: Does not fit on 3312 Handle

Dispenser Handle - Part Number: 3312
NOTE:
For 12” & 18” Film Rolls ONLY

Lens protection sheets:

Clear-View Lens Pads
Transparent self-adhesive multi-sheet system protects windows and light fixtures from over-spray in paint booths.
This product consists of twenty individual layered pads that are tabbed and peels off for easy removal after use.
With easy installation and quick changeover this product is a clear choice for your cleanup solution.

20 count per pad
Case PK QTY of 6

3800  (13" x 51")
4855  (24" x  50")
5303  (18" x 46")

LDPI Lens Film Spec Sheet

BOOTH LIGHTINGfloor paper

Lighting fixtures specific to paint spray booth applications. These fixtures are rated for environments where paint residues, fumes and dust are present.

LDPI Paint Booth Lighting

image

OTHER ACCESSORIES

We have several options and accessories available. Please inquire by clicking the "Consult an expert" button below.

Gun Holders

image

Snapper Bars

image

 

Do you have a question or need application assistance?