1-800-334-1001

 

Email Us Credit App Repair Form

Menu

GRINDERS - DYNABRADE

  • INLINE

  • RIGHT ANGLE

  • VERTICAL

image

4" (102 mm) Dia. Straight-Line Type 1 Wheel Grinder
Model No. 52374

1 hp, 15,000 RPM, Rear Exhaust, 3/8"-24 Spindle Thread

  • Type 1 Wheel Grinder, for cleaning metal, grinding and smoothing weld seams, removing imperfections before painting.
  • app shot
  • 4" Diameter, Straight Line, 1 hp, 15,000 RPM.
  • Accepts optional 4" diameter Type 1 Wheel, with 3/8" center hole (maximum wheel width of 1/4").
  • Governor-controlled motor maintains RPM under heavy load; rear exhaust.
  • Safety-lock lever is included on all models.
image

3" (76 mm) Dia. Straight-Line Type 1 Extension Wheel Grinder
Model No. 52376

1 hp, 12,000 RPM, Rear Exhaust, 3/8"-24 Spindle Thread

  • Type 1 Wheel Grinder, for cleaning metal, grinding and smoothing weld seams, removing imperfections before painting.
  • 3" Diameter, Straight Line, 1 hp, 6" Extension, 12,000 RPM.
  • Accepts optional 3" diameter Type 1 Wheel, with 3/8" center hole (maximum wheel width of 1/2"). Governor-controlled motor maintains RPM under heavy load; rear exhaust.
  • Safety-lock lever is included on all models.
  • Standard cushioned grip enhances operator comfort and control.
image

6" (152 mm) Dia. Horizontal Type 1 Wheel Grinder
Model No. 53300

3 hp, 6,000 RPM, Rear Exhaust, 5/8"-11 Male Spindle Thread

  • For fast weld and stock removal, rust and scale removal, cleaning metal and more. Essential tools for metal fabrication, foundries, steel mills, shipyards and oil refineries!
  • Governor-controlled air motor maintains speed under heavy load. Side exhaust. Gearless motor design for reduced downtime and increased efficiency.
  • 5/8"-11 male spindle, with safety retaining collar and screw to retain flange. Wheel flanges and guards meet ANSI B7.1 and ISO 11148 safety standards.
  • Safety-lock throttle lever prevents accidental start-up of tool. Model includes convenient Hanger Bracket, Hex Key and Open-End Wrench.
  • Model includes Norton NorZon® III Type 1 Reinforced Grinding Wheel (no. 66252837965). Wheel is 6" O.D. x 1" wide with 5/8" center hole.
image

Cone or Plug Wheel Grinder
Model No. 52715

1 hp, Straight-Line, 12,000 RPM, Rear Exhaust, 3/8"-24 Spindle Thread

  • Cone or Plug Wheel Grinder, for cleaning metal, grinding and smoothing weld seams, removing imperfections before painting.
  • Straight Line, 1 hp, Rear Exhaust, 12,000 RPM.
  • Accepts optional Abrasive Cone or Plug Wheel, 1-1/4" diameter.
  • Governor-controlled motor maintains RPM under heavy load. Safety-lock lever is included on all models.
  • Industrial applications in fabrication plants, welding shops, foundries, steel mills and shipyards.

image

.4 hp Straight-Line Die Grinder
Model No. 47201

3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4" & 6 mm Collets, Extended Muffler

  • .4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
  • Integrated Safety-Lock Throttle Lever has a contoured shape for operator capp shotomfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
  • Governor-Controlled Motor (950 RPM to 30,000 RPM Models) Maintains consistent motor speed under load. Color-coded for easy identification. Ergonomic Oval-Shaped Tool Housing conforms to natural shape of hand for optimum comfort. Lightweight, tool design; each model weighs 0.5 oz (15 g) less than its previous version!
  • 3-Vane Rotor allows wider offering of tool speeds. Achieves stall-torque and horsepower performance equal to tools with 4-vane rotor. Innovative Air Flow Channel Exhaust; air moves through channel between composite housing and housing core, maintaining comfortable temperature of tool housing!
  • Hardened Tool Cylinder; Tool cylinder is made of case-hardened material, to retain core toughness and prevent cracking. Full-Length Housing Core; Housing core runs the full length of tool, serving as the backbone and providing consistent weight distribution of tool. Comfortable Tactile Grip; Tool’s tactile grip is co-molded to composite housing, providing comfortable non-slip grip. Collet Style is 3-Piece. Includes 1/4" Collet Insert (50013) & 6 mm Collet Insert (50016)
image

.7 hp Straight-Line Die Grinder, Steel Housing
Model No. 53812

20,000 RPM, Gearless, Rear Exhaust, 1/4" Collet

  • Tool feature's steel housing for increased durability. Used in Steel Fabrication, Welding Operations, Shipyards, Foundries and more!
  • Dynabrade’s Steel Housing Die Grinders feature the quality and power you have come to expect.
  • Gearless for reduced maintenance and downtime. Made in the USA.
  • Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
  • Higher torque and lower RPM for more power. Rubber Grip Housing reduces vibration and cold air transmission. Safety Lock Lever standard on all models.
image

.7 hp Extended Right Angle Die Grinder
Model No. 54374

12,000 RPM, Steel, Geared, Rear Exhaust, 1/4" & 6 mm Collet

  • Dynabrade's .7 hp Die Grinders are ideal for rapid material removal, deburring, finishing and polishing, in an ergonomic right angle design. These top-quality tools accept optional carbide burrs and mounted points, providing countless solutions to manufacturing and fabrication industries, foundries, die shops, welding operations, nuclear facilities, shipyards and more!
  • All models include 1/4" and 6 mm Collet Insert.
  • Rugged steel housing and head for increased durability in abusive environments.
  • Allows additional reach of 3-3/8" (86 mm).
  • Safety-lock throttle lever prevents accidental start-up of tool.
image

.33 hp Right Angle Die Grinder
Model No. 52196

18,000 RPM, Gearless, Rear Exhaust, 1/4" Collet

  • Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
  • Powerful high-torque air motor. Gearless for reduced maintenance and downtime.
  • Optional safety-lock lever available.
  • Thermal-insulated handle reduces cold air transmission to operator.
image

.4 hp Right Angle Die Grinder
Model No. 47801

15,000 RPM, Spiral-Geared, Front Exhaust, 1/4" & 6mm Collets

  • Kevlar® phenolic vanes for longer life. Lightweight ergonomic design for greater comfort and control. One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.
  • All models have air passage to continually cool the gear box; gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
  • Dual wick lubrication system – saturated with gear oil for extended gear life – over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
  • Governor-controlled motor maintains speed under load. Includes both 1/4" & 6mm collet inserts.
image

.4 hp 7 Degree Offset Die Grinder
Model No. 48205

25,000 RPM, Gearless, Extended Rear Exhaust, 1/4" & 6mm Collets

  • Kevlar® phenolic vanes for longer life. Lightweight ergonomic design for greater comfort and control. One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.
  • Governor-controlled motor maintains speed under load. Includes both 1/4" & 6mm collet inserts.
  • Highest horsepower and torque levels of any similar competitive product.
image

1/4" Collet Die Grinder
Model No. 52269

.5 hp, 7 Degree Offset, 20,000 RPM, Rear Exhaust

  • Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
  • Gearless for reduced maintenance and downtime.
  • Extended rear exhaust muffler design.
image

.55 hp Right Angle Die Grinder
Model No. 52280

15,000 RPM, Gearless, Extended Rear Exhaust, Long Shank, 1/4" Collet

  • Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
  • Powerful high-torque air motor.
  • Gearless for reduced maintenance and downtime.
  • Optional safety-lock lever available.
  • Extended rear exhaust muffler design.
image

.7 hp Extended Right Angle Die Grinder
Model No. 54347

12,000 RPM, Composite, Geared, Rear Exhaust, 1/4" & 6 mm Collet

  • Dynabrade's .7 hp Die Grinders are ideal for rapid material removal, deburring, finishing and polishing, in an ergonomic right angle design. These top-quality tools accept optional carbide burrs and mounted points, providing countless solutions to manufacturing and fabrication industries, foundries, die shops, welding operations, nuclear facilities, shipyards and more!
  • All models include 1/4" and 6 mm Collet Insert.
  • Thermal-insulated handle reduces cold air transmission to operator.
  • Allows additional reach of 3-3/8" (86 mm).
  • Safety-lock throttle lever prevents accidental start-up of tool.
image

Die Grinder
Model No. 52732

1/4" Collet

  • Includes 1/4" Collet Insert (50013), fits optional 1/8" (50065), 3/8" (50014), 6 mm (50016), 8 mm (50039)
  • Governor-controlled to maintain RPM under heavy load.
  • Safety-lock lever is standard on all models.
  • Unique anti-clog exhaust baffling.
image

4-1/2" (114 mm) Dia. Electric Right Angle Depressed Center Wheel Grinder
Model No. 40260

120 V (AC), 60 Hz, 11,000 RPM, 5/8"-11 Spindle Thread

  • 40260 Electric Depressed Center Wheel Grinder offers countless grinding and material removal solutions to industries such as metal fabrication, general welding, masonry, concrete, composites, ornamental ironwork and maintenance/repair facilities.app shot
  • 5/8"-11 spindle thread accepts optional Type 27 Depressed Center Wheels and Abrasive Flap Discs, 4-1/2" (114 mm) diameter (only) with 7/8" (22 mm) center hole. Industrial-quality electric motor rated at 6 amps. Easily accessible brush holders allow quick brush replacement (recommended every 150 hours).
  • Convenient spindle lock offers fast change of accessory. Press-fit design keeps gear in place, to maintain accessory mounting accuracy.
  • Locking power switch allows extended use with less operator fatigue. Repositioning side handle for left or right hand operation.
  • All ball-bearing and needle-bearing construction ensures longer tool durability. Type 27 Wheel sold separately.
image

4-1/2" (114 mm) Dia. Right Angle Depressed Center Wheel Grinder
Model No. 52632

1.3 hp, 12,000 RPM, Rotational Exhaust, 5/8"-11 Spindle Thread

  • 1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.
  • 12,000 RPM, 5/8"-11 Spindle Thread.
  • Tool accepts optional 4-1/2" (114 mm) diameter Type 27 Depressed Center Wheels with 7/8" (22 mm) center hole.
  • Includes 25212 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
  • Tool also accepts optional 4-1/2" (114 mm) diameter Abrasive Flap Discs (flanging sold separately). Vibration Dampening Side Handle included.
image

7" (178 mm) Dia. Right Angle Depressed Center Wheel Grinder
Model No. 50348

2 hp, 6,000 RPM, Side Exhaust, 5/8"-11 Spindle Thread

  • Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
  • 7" Diameter, Right Angle, 2 hp, Side Exhaust, 6,000 RPM.
  • Accepts optional 7" diameter Type 27 Depressed Center Wheel, with 7/8" center hole (wheel width of 1/8" to 1/4"). Includes 11399 Type 27 Wheel Mounting Adapter Kit, with front and rear flange plus hex wrench.
  • Powerful air motor is governor-controlled to maintain RPM under heavy load, and to insure smooth operation. Lubricated gears increase durability
  • Safety-lock throttle lever prevents accidental startup. Side handle enhances operator control. Rubber insulated grip reduces cold on operator's hand.
image

6" (152 mm) Dia. Type 11 Vertical Cup Wheel Grinder
Model No. 53233

2 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8"-11 Spindle Thread

  • Ideal for heavy-duty applications in foundries and shipyards. Fast stock, rust and scale removal.app shot
  • Governor-controlled air motor maintains tool RPM under heavy load. Over-speed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less down-time.
  • Insulated tool handle minimizes cold air transmission to the hand. Handle position is adjustable for operator comfort. Includes safety-lock throttle lever. For peak performance, use of optional 95870 Air Hose-1/2" (13 mm) diameter is recommended.
  • Model accepts optional Type 11 Cup Wheels, 6" (152 mm) diameter. Wheel NOT included with tool. Covers more area in less time!
image

7" (178 mm) Dia. Type 27 Vertical Depressed Center Wheel Grinder
Model No. 53232

2 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8"-11 Spindle Thread

  • Ideal for heavy-duty applications in foundries and shipyards. Fast stock, rust and scale removal.
  • Governor-controlled air motor maintains tool RPM under heavy load. Over-speed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less down-time.
  • Insulated tool handle minimizes cold air transmission to the hand. Handle position is adjustable for operator comfort. Includes safety-lock throttle lever. For peak performance, use of optional 95870 Air Hose-1/2" (13 mm) diameter is recommended.
  • Model accepts optional Type 27 reinforced Depressed Center Wheels, 7" (178 mm) diameter. Wheel NOT included with tool. Covers more area in less time!

Do you have a question or need application assistance?