1-800-334-1001

 

Email Us Credit App Repair Form

Menu

5-GALLON CAN TUMBLERS

PAIL, CAN OR BUCKET MIXERS

Morse Can Tumblers provide aggressive corner-over-corner mixing action. Mix products inside your sealed cans or pails with these can rotators to reduce hazards and save clean-up. Use your pail and can mixer to blend the contents of closed 1 to 5 gallon pails or cans (4 to 19 liter pails or cans).

Please note: Morse 5-Gallon Can Tumblers rotate pails at a constant 23 RPM in one direction. They are NOT can shakers, as they do NOT shake or oscillate cans.

 

 

  • Morse 5-Gallon Can Tumblers mix or agitate small batches quickly and economically
  • Re-homogenize settled ingredients
  • Use as pail or pail or bucket mixer to blend liquid or dry materials
  • Tumble pails of parts with media to deburr or polish them


image

Double Can Tumblers

Rotate 1 or 2 cans at a time.

 

 

image

Single Can Tumblers

Rotate 1 can.

 

 

 

 

 

 

 

 

 

  • These pail and pail or bucket mixers hold cans at an angle to horizontal resulting in a vigorous "corner-over-corner" mixing action
  • Can Tumblers rotate pails continuously in one direction. Pail mixers do NOT shake or oscillate cans.
  • Accept steel or plastic cans and pails:
    • Up to 12.5" (31 cm) diameter
    • 4.5" to 16.5" (12 to 42 cm) tall
    • Includes typical 5-gallon cans
  • Capacity: 100 Lb. (45.5 kg) per can
  • Tumbling speed: 23 RPM (19 RPM on 50Hz models)
  • Can tumblers provide exceptional savings when materials to be agitated are already packed in cans
  • Quickly secure pail in can mixer holder with hand wheel on threaded rod and locking handle
  • Can mixer base dimensions: 28" x 28" (71 x 71 cm).
  • Ship Dimensions: L48" W40" H29" (122 x 102 x 74 cm)

Motors on Morse 5-Gallon Can Tumblers

  • 1/4 HP, 60 Hz in choice of voltage, phase, TEFC or explosion proof (50 Hz also available)
  • Single phase, 115V TEFC version on model 2-305-1 or 1-305-1 includes a timer you set at 1 to 60 minutes for automatic shut-off. Timer is NOT available on other pail mixer models.
  • Air motors are also available. Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. Filter, regulator and lubricator (FRL) for your pail mixer is available.
    • Part # 90010-P - Description: KIT, 1/4" FRL & VALVE
    • Part # 90020-P - Description: KIT, 3/8" FRL & VALVE

OPTIONS

image

Enclosures with Safety Interlock for your Morse 5-gallon pail agitator.

Install all Morse Rotators in accordance with local requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.

 

For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."

image

Guard Enclosure with Single Can Tumbler

image

Guard Enclosure with Double Can Tumbler

image

Custom Can Tumbler for Taller Can

Do you have a question or need application assistance?