1-800-334-1001

 

Email Us Credit App Repair Form

Menu

PANASONIC MECHANICAL PULSE TOOLS

  • NON-WIRELESS

  • WIRELESS

Panasonic Cordless Tools Catalog

    Mechanical Pulse Tool Features:

  • Powerful production tool designed for ergonomics and provides virtually no torque reaction.
  • Patented Panasonic CPU controlled auto shut-off
  • Brushless Motor – energy efficient, no maintenance and about doubles the life of the tool
  • Hybrid Switch (<.5 amps) – about doubles the life of the switch
  • High fastening speed 2300 rpm’s (no load)
  • Operator lockout for consistent quality
  • Low Battery Disable - Disables the tool if the battery doesn’t have the capacity to achieve the proper torque
  • Operator Visual Pass / Fail Indicator
  • Compact and Lightweight 2.8 - 3.3 lbs
  • NOTE: EYFL uses 10.8V battery; EYFM use 14.4V battery
  • 3-22Nm
    (2.2 - 16.2 ft. lbs.)

  • 6-30Nm
    (4.4 - 22 ft. lbs.)

  • 16-53Nm
    (11.8 - 39 ft. lbs.)

  • 25-100Nm
    (18.4 - 73.7 ft. lbs.)

image

EYFLA4A

TORQUE RANGE: Torque controlled range – 3-22 Nm (2.2-16.2 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 40 Nm (29.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-950, 2: 0-1300, 3: 0-1450, 4-8: 0-1550, 9-30 & F: 0-2300
DRIVE: ¼" Hex quick change chuck


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M10 Bolt (F mode, tightening 3 sec.)
image

EYFLA5A

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: ¼" Hex quick change chuck


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** ** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA5P

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: 3/8" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA5Q

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: 3/8" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA6P

TORQUE RANGE: Torque controlled range – 16-53 Nm (11.8-39 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 120 Nm (88.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA6J

TORQUE RANGE: Torque controlled range – 16-53 Nm (11.8-39 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 120 Nm (88.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA1P

TORQUE RANGE: Torque controlled range – 25-100 Nm (18.4-73.7 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 185 Nm (136.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M16 Bolt (F mode, tightening 3 sec.)
image

EYFLA1J

TORQUE RANGE: Torque controlled range – 25-100 Nm (18.4-73.7 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 185 Nm (136.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M16 Bolt (F mode, tightening 3 sec.)

Panasonic Cordless Tools Catalog

    Mechanical Pulse Tool Features: (Optional wireless version for quality control)

  • Powerful production tool designed for ergonomics and provides virtually no torque reaction.
  • Patented Panasonic CPU controlled auto shut-off
  • Brushless Motor – energy efficient, no maintenance and about doubles the life of the tool
  • Hybrid Switch (<.5 amps) – about doubles the life of the switch
  • High fastening speed 2300 rpm’s (no load)
  • Operator lockout for consistent quality
  • Low Battery Disable - Disables the tool if the battery doesn’t have the capacity to achieve the proper torque
  • Operator Visual Pass / Fail Indicator
  • Compact and Lightweight 2.8 - 3.3 lbs
  • Optional wireless version for quality control
  • NOTE: EYFL uses 10.8V battery; EYFM use 14.4V battery
  • 3-22Nm
    (2.2 - 16.2 ft. lbs.)

  • 6-30Nm
    (4.4 - 22 ft. lbs.)

  • 16-53Nm
    (11.8 - 39 ft. lbs.)

  • 25-100Nm
    (18.4 - 73.7 ft. lbs.)

image

EYFLA4AR

TORQUE RANGE: Torque controlled range – 3-22 Nm (2.2-16.2 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 40 Nm (29.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-950, 2: 0-1300, 3: 0-1450, 4-8: 0-1550, 9-30 & F: 0-2300
DRIVE: ¼" Hex quick change chuck


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M10 Bolt (F mode, tightening 3 sec.)
image

EYFLA5AR

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: ¼" Hex quick change chuck


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** ** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA5PR

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: 3/8" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA5QR

TORQUE RANGE: Torque controlled range – 6-30 Nm (4.4-22 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 90 Nm (66.4 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
1: 0-1300, 2: 0-1450, 3: 0-1550, 4-30 & F: 0-2300
DRIVE: 3/8" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA6PR

TORQUE RANGE: Torque controlled range – 16-53 Nm (11.8-39 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 120 Nm (88.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA6JR

TORQUE RANGE: Torque controlled range – 16-53 Nm (11.8-39 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 120 Nm (88.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M14 Bolt (F mode, tightening 3 sec.)
image

EYFLA1P

TORQUE RANGE: Torque controlled range – 25-100 Nm (18.4-73.7 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 185 Nm (136.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with pin detent


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M16 Bolt (F mode, tightening 3 sec.)
image

EYFLA1JR

TORQUE RANGE: Torque controlled range – 25-100 Nm (18.4-73.7 ft. lbs.) (Based on medium hard joint*)

Maximum Torque in non-shut off mode - Approx. 185 Nm (136.5 ft. lbs.)**
SPEED: No Load Speed (Torque Setting : rpm)
Torque Setting 1-30 & F: 0-2300
DRIVE: ½" Square drive with through hole


* Final results may have higher torque ranges with hard joints and lower torque ranges with soft joints
** M16 Bolt (F mode, tightening 3 sec.)

Do you have a question or need application assistance?