1-800-334-1001

 

Email Us Credit App Repair Form

Menu

RESPIRATORY SUPPLIED AIR PUMPS

    When placed in a clean air environment, Bullard Free-Air® pumps offer a low-cost means of supplying clean, breathable air to respirator wearers working in contaminated environments up to 300 feet away from the pump. They are easy to operate and maintain. Free-Air pumps do not require temperature alarms, CO monitors or airline filters, so they can be a cost-effective alternative to compressed air.
  • Completely mobile and portable
  • No expensive installation costs
  • Models available to suit any application
  • Models that support up to ten respirators
  • Available in versions to support climate control devices
  • Bullard Free-Air® pumps are oil-less air pumps with open, drip-proof motors. Available in a variety of configurations to support one to 10 respirators.

    Cooling Devices & Free-Air Pumps | Pressure vs. Flow

  • ICE PUMP

  • EDP-10 SERIES

  • EDP-16 SERIES

  • EDP-30 SERIES

  • EDP-50 SERIES

  • AIR DRIVEN PUMPS


image

A revolutionary Breathing Air Pump System that provides cool Grade D Air from the trusted name in Respiratory Protection... Bullard

The Bullard ICE Pump provides workers with increased protection and comfort while maximizing productivity. ICE safely provides clean, breathable air to workers wearing Type C or CE Continuous Flow Supplied Air Respirator hoods or masks.


    Absolute Compliance

  • Provides Cool Grade D Breathable Air
  • No CO Monitor required
  • Easily combines with most NIOSH-approved low pressure supplied air respirator systems
  • Complete Comfort

  • Reduces heat stress in workers
  • Provides more than 15°F of ambient air cooling* to users
  • Portable with standard Wheel Kit and Roll Cage
  • Improved Productivity

  • No set up or calibration required
  • Reduces worker fatigue
  • Increases productivity
  • Applications

  • Painting
  • Blasting
  • Spray Foam
  • Industrial
  • *when used with Bullard's Frigitron2000

     

    ICE Pump Features & Benefits Brochure

     

    ICE Pump FAQs

image

EDP-10 SERIES

Supplies air for one hood-style or two half or full face mask airline respirators. Air flow is 10 cfm at 5 psig. The EDP10 is lightweight at only 49 pounds!

  • Supplies air for one full hood-style or two half or full-face masks
  • No expensive installation cost
  • Applications:  Abrasive Blasting and Painting
  • Cost-effective alternative to compressed air
  • Meets all OSHA 1910-134 Regulations
  • No CO Monitors required
  • NO Cooling available

 

Free Air Pumps Features & Benefits Brochure

 

image

EDP-16 SERIES

Supplies air for two hood-style or three half or full face mask airline respirators. Air flow is 16 cfm at 5 psig. Available in a hazardous-duty version (EDP16HAZ).

  • Supplies air for two full hood-style or three half or full-face mask
  • No expensive installation cost
  • Applications:  Abrasive Blasting and Painting
  • Cost-effective alternative to compressed air
  • Meets all OSHA 1910-134 Regulations
  • No CO Monitors required
  • NO Cooling available

 

Free Air Pumps Features & Benefits Brochure

 

image

EDP-30 SERIES

Supplies air for four hood-style, six half or full face mask airline respirators, or two hood-style respirators equipped with Frigitron climate control devices. Respirators must be approved to operate on 30 psig or less. Shipped complete with inlet and outlet filter cartridges, pressure gauges, pressure relief valves, and one air supply hose quick-disconnect pod with six 1/2” Industrial Interchange (Hansen compatible) quick-disconnect couplers.

 

 

 

 

  • Supplies air for four full hood-style or six half or full face masks
  • No expensive installation cost
  • Applications:  Abrasive Blasting and Painting
  • Cost-effective alternative to compressed air
  • Meets all OSHA 1910-134 Regulations
  • No CO Monitors required
  • Cooling available

 

Free Air Pumps Features & Benefits Brochure

 

image

EDP-50 SERIES

Supplies air for seven hood-style or ten half or full face mask airline respirators. Air flow is 50 cfm at 5 psig. Features point of attachment, quick disconnect pods that can be extended up to 300 feet from pump.

 

 

 

 

 

 

 

 

  • Supplies air for seven full hood-style or ten half or full face masks
  • No expensive installation cost
  • Applications:  Abrasive Blasting and Painting
  • Cost-effective alternative to compressed air
  • Meets all OSHA 1910-134 Regulations
  • No CO Monitors required
  • Cooling available

 

Free Air Pumps Features & Benefits Brochure

 

image

AIR DRIVEN PUMPS

Air driven Free-Air® Pumps are ideal for both general purpose and hazardous duty use.

 

The air driven Free-Air Pump supplies air to four hood-style or six half or full face mask respirators approved to operate at 25 psig or less. Intrinsically safe and offering an inlet drive pressure of 95 psig, air flow is 30 cfm at 5 psig. The ADP20 is also compatible with the Bullard Frigitron 2000 climate control devices (for one worker).

 

 

 

 

 

ADP20 Features & Benefits Brochure

 

 

Free Air Pumps Features & Benefits Brochure

 

Do you have a question or need application assistance?