1-800-334-1001

 

Email Us Credit App Repair Form

Menu

SANDERS - DYNABRADE

 

  • RANDOM ORBITAL SANDERS

  • ORBITAL SANDERS

  • INLINE SANDERS

  • DISC SANDERS

  • BELT SANDERS



  • DYNORBITAL® SUPREME

  • DYNORBITAL® SILVER SUPREME

  • DYNORBITAL-SPIRIT®

image

5" (127 mm) Dia. Non-Vacuum Dynorbital Supreme Random Orbital Sander
Model No. 56815

.28 hp, 12,000 RPM, 3/16" (5 mm) Dia. Orbit, Rear Exhaust.

  • Non-Vacuum Dynorbital Supreme includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits available, to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. 3/16" (5 mm) diameter orbit.
  • Dynorbital Supreme models run at 12,000 RPM. Rotor utilizes five blades and produces more useable power. Composite rotor is stronger and has better lubricating qualities, enabling blades to last longer.
  • Composite base has integrated rubber over-mold creating a non-slip feel, as well as insulating from cold. Tapp shothe air motor is suspended by vibration-absorbing rubber rings (Patent No. 5,319,888) to minimize vibration.
  • Triple-sealed front double row balancer bearing (Patent No. 4,854,085) is guarded from sanding residue for long life and lower maintenance; easy replacement using 57098 Repair Kit.
  • Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. Also offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.) Order 59330 Comfort Platform (U.S. Patent No. D610,428) separately, to install on existing tools!

image

5" (127 mm) Dia. Non-Vacuum Dynorbital Silver Supreme Random Orbital Sander
Model No. 69020

.26 hp, 12,000 RPM, 3/16" (5 mm) Dia. Orbit, Rear Exhaust.

  • Includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. Grey lever identifies 3/16" (5 mm) dia. orbit, used for general sanding.
  • True 12,000 RPM air motor. Floating rotor utilizes five blades, producing more usable power (.26 hp/194 W). High-strength, composite rotor has better lubricating qualities, allowing blades to last longer. Less air (16 SCFM/450 LPM) is used more efficiently to maintain maximum power.
  • Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. app shotAlso offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.)
  • Throttle lever recesses into housing grip when depressed, eliminating pressure-point on operator's palm. Lever is made from composite material to insulate against cold air. Lever is color-coded to designate tool orbit. Drop-in motors available for quick and easy maintenance; minimizes downtime. Muffler elements are easily changed for convenient maintenance. Low Sound Levels. Muffling system reduces exhaust sound levels.
  • For high production usage. Enhanced ergonomic features. Steel cylinder and end plates increase motor efficiency. Efficient vacuum capabilities. Stay-tight threaded muffler. Single-piece lock ring.Patented bearing protection. Easy-to-read laser markings.

image

5" (127 mm) Dia. Non-Vacuum Dynorbital-Spirit Random Orbital Sander
Model No. 59020

.25 hp, 12,000 RPM, 3/16" (5 mm) Dia. Orbit, Rear Exhaust.

  • Includes low profile, premium urethane weight-mated sanding pad. Optional vacuum conversion kits are available to easily convert non-vacuum tool to self-generated vacuum tool or central vacuum tool. Grey lever identifies 3/16" (5 mm) dia. orbit, used for general sanding.
  • Drop-In Motor available (sold separately) to reduce costly down-time associated with routine maintenance. More Power - True 12,000 RPM air motor. Floating rotor utilizes five blades, producing more usable power (.25 hp/186 W). High-strength, composite rotor has better lubricating qualities, allowing blades to last longer. Less air (14 SCFM/396 LPM) is used more efficiently to maintain maximum power.
  • Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. Also offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.) app shotOrder 59330 Comfort Platform (U.S. Patent No. D610,428) separately, to install on existing tools!
  • Throttle lever recesses into housing grip when depressed, eliminating pressure-point on operator's palm. Dynorbital-Spirit lever is made from composite material to insulate against cold air. Lever is color-coded to designate tool orbit. Easy maintenance and vacuum conversion. Muffler elements are easily changed for convenient maintenance. Low Sound Levels. Muffling system reduces exhaust sound levels.
  • Speed Control allows thumb-control regulating of tool speed. Lighter air-motor assembly, ideal for vertical and overhead sanding applications. Precision one-piece motor shaft and counterbalance. High-quality Double Row Pad Bearing, protected by unique V-Seal, improves bearing life and ensures reduced vibration. Perfectly-balanced, weight-mated sanding pad with one-piece hub design. Dynabrade premium urethane pads offer smoother operating performance and minimal vibration.

  • DYNABUG® "MODEL T"

  • DYNABUG® "JITTER-BUG"

  • DYNABUG® II

image

4" W x 4-5/16" L (102 mm x 110 mm) Dynabug® "Model T" Orbital Sander, Non-Vacuum with Clips
Model No. 57920

20,000 RPM, 3/32" (2 mm) Dia. Orbit, Rear Exhaustapp shot

  • 3/32" diameter orbital action is ideal for fine finishes. Lightweight only 1 lb! Palm-style, ergonomic design features low profile grip for greater operator comfort and control. Operates 8-9 SCFM at 90 PSIG. Can be run by as little as 3 horsepower compressor.
  • Low maintenance; easy to repair. Turbine-style vaneless air motor needs no oil!
  • Easy interchangeable sanding pads. Uses reattachable and PSA (adhesive-backed) abrasive sheets and discs; coated and non-woven nylon.
  • Includes 57999, 4" X 4-5/16", Vinyl-Face Pad with clips.

image

3-2/3" W x 7" L (93 mm x 178 mm) Dynabug Orbital Sander, Non-Vacuum
Model No. 57800

.24 hp, 8,000 RPM, 3/16" (5 mm) Dia. Orbitapp shot

  • 3/16" (5 mm) diameter orbit
  • Powerful 8,000 RPM air motor utilizes 16 SCFM at 90 PSIG.
  • Compact size and lightweight. Excellent for sanding restricted areas and vertical sides. Tools have heavy-duty clips to accept traditional 3-2/3" x 9" abrasive sheets (rolls also available).
  • Includes premium 57850 Vinyl-Face Sanding Pad for PSA (abrasive-backed) abrasives

image

3" (76 mm) W x 4-1/4" (108 mm) L Dynabug II Orbital Sander, Non-Vacuum
Model No. 58500

.15 hp, 10,000 RPM, 3/32" (2 mm) Dia. Orbit, Rear Exhaust

  • Powerful .15 hp (112 W), 10,000 RPM air motor gets the job done in countless applications, utilizing just 13 SCFM (368LPM) at 90 PSI (6.2 Bar).
  • Precise 3/32" orbital motion is ideal for achieving a controlled, ultra-fine finish on a variety of surfaces. Compact size is ideal for all operators, including those with smaller hands.app shot
  • Engineered and tested to ensure less tool vibration than any competitive model! Lighter tool weight minimizes hand and arm fatigue. Perfect for vertical applications.
  • Rectangular shape sands deep into corners, where round pads cannot reach.
  • Includes 56315 Hook-Face Sanding Pad, 74 mm wide x 109 mm long (approximately 3" x 4-1/4"). Comfort Platform provides additional hand and wrist support, further enhancing operator comfort. Also offers increased protection against cold air exhaust. (NOTE: Comfort Platform is removable.) Order 59330 Comfort Platform (U.S. Patent No. D610,428) separately, to install on existing tools!

  • DYNALINE

  • FILE BOARD SANDER

  • DYNISHER

  • DYNINGER

  • DYNASTRAIGHT® FLAPPER

image

2-3/4" (70 mm) W x 8" (203 mm) L Dynaline Sander, Non-Vacuum
Model No. 57400

.3 hp, 2,400 SPM, 3/8" (10 mm) SL, Rear Exhaust

  • 2,400 strokes per minute at 90 PSIG (6.2 Bar). 3/8" (10 mm) stroke length.app shot
  • Uses PSA coated and non-woven nylon sheets and rolls
  • Quality constructed pad is weight-mated to tool for low vibration, smooth operation and superior finishes.
  • Includes 2-3/4" wide x 8" long vinyl-face non-vacuum Sanding Pad (57454).

image

2-3/4" W x 11" L (70 mm x 279 mm) File Board Sander, Non-Vacuum
Model No. 51350

.3 hp, 2,400 SPM, 3/8" (10 mm) SL, Rear Exhaust

  • File board excellent for industrial graining of stainless steel
  • Tool features high quality gear for smooth-running in-line sanding action. 2,400 strokes per minute. 3/8" (10 mm) long sanding stoke.app shot
  • For use with PSA (adhesive-backed) coated and non-woven sheets and rolls.
  • Includes 2-3/4" wide x 11" long 57512 Premium Urethane PSA (adhesive-backed) Sanding Pad with clips.
  • Also accepts 2-3/4" wide x 11" long pads without clips, and 2-3/4" wide x 8" long non-vacuum pads.

image

Dynisher Finishing Tool
Model No. 13400

.7 hp, 7 Degree Offset, 3,400 RPM, Rear Exhaust, 3/4" (19 mm) Dia. Arbor

  • Dynisher Air-Powered Abrasive Finishing app shotTool achieves superior in-line finishes on metal.
  • 3,400 RPM, .7 hp. Excellent for blending and finishing stainless steel and other metals, leaving an in-line scratch pattern.
  • Arbor (3/4" dia.) included for mounting a variety of abrasives and accessories.
  • Variable speed control and safety-lock lever throttle.
  • Ideal for use with optional 92938 Dynacushion pneumatic wheel (5" dia. x 3-1/2" wide).

image

Dyninger Finishing Tool
Model No. 52060

.4 hp, Straight-Line, 200-950 RPM, Rear Exhaust, 5/8" (16 mm) or 1" (25 mm) Dia. Arbor

  • Dyninger Air-Powered Abrasive Finishing Tool for sanding, defuzzing, blending, scuffing, denibbing. app shot
  • 950 RPM, .4 hp. High torque air motor includes arbor (1" dia.) for mountingup to six coated abrasive stars, 8" diameter with 1" center hole. (Stars sold separately.)
  • Excellent for blending and scuffing sealer coatings on contours and flat surfaces. Whitewood sand raised panels, turnings, moldings and hard-to-reach areas.
  • Defuzz wooden grid pattern panels and denibbing raised grain. Great for light deburring of metal.

image

Dynastraight® Flapper 8" (203 mm) Extension Finishing Tool
Model No. 51134

.5 hp, Straight-Line, 18,000 RPM, Rear Exhaust, 1/4"-20 Female Thread

  • Dynastraight Flapper Air-Powered Abrasive Finishing Tool is ideal for polishing insides of pipe and tubing. Also excellent for light deburring.
  • Remove rust, oxide and scale; clean welds, remove paint and surface condition using abrasive flap wheels. Adjustable speed, lever throttle, rear exhaust.
  • Includes 51116 Adapter. Shown with optional 90831 Abrasive Flap Wheel (2-1/2" dia. x 1" wide) (63.5 mm dia. x 25 mm wide)

  • 2" DIA. DISC

  • 3" DIA. DISC

  • 4" DIA. DISC

  • 7" DIA. DISC

image

2" (51 mm) Dia. 7 Degree Offset Disc Sander
Model No. 48500

.4 hp, 25,000 RPM, Gearless, Extended Rear Exhaust, Locking-Type Female Pad

  • Includes 51344 Locking-Type Pad (2" diameter).
  • Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced maintenance and down-time.
  • Extended muffler design.

image

3" (76 mm) Dia. Right Angle Disc Sanderapp shot
Model No. 48530

.4 hp, 12,000 RPM, Geared, Extended Rear Exhaust, Locking-Type Female Pad

  • Includes 51346 Locking-Type Pad (3" diameter).
  • Extended muffler design.

image

4" (102 mm) Dia. Right Angle Disc Sander
Model No. 52631

1.3 hp, 12,000 RPM, Rotational Exhaust, 3/8"-24 Spindle Thread

  • Includes 50192 locking-type Backing Pad, 4" (102 mm) in diameter
  • Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side Handle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.app shot
  • Cast Aluminum Construction Tool housing and handle made of solid cast aluminum. Safety-Lock Throttle Lever Prevents accidental start-up of tool. Lever has no sharp edges or pinch-points.
  • Wick-Lube System for Longer Gear Life extends gear life with simple lubrication. All models include Gear Oil and Gear Oil Gun. Insulated Throttle Handle Reduces cold air transmission to operator's hand. Handle position is adjustable, increasing comfort and efficiency.
  • Robust 1.3 hp Air Motor 1.3 hp (970 W) governor-controlled air motor delivers powerful, efficient performance. Convenient Spindle Lock Allows quick and easy change of grinding wheel or abrasive disc. Less downtime!

image

7" (178 mm) Dia. Right Angle Disc Sander
Model No. 52657

1.3 hp, 6,000 RPM, Rotational Exhaust, 5/8"-11 Spindle Thread

  • Includes 51151 Backing Pad, 7" (178 mm) diameter, plus mounting hardware. Accepts optional 7" (178 mm) diameter Abrasive Discs with 7/8" (22 mm) center hole.
  • Dynabrade's 1.3 hp (970 W) Right Angle Sander offer countless grinding and material removal solutions to industries such as metal/stainless steel fabrication, composites, masonry, ironwork and general welding. Designed to the Dynabrade standard of excellence, these tools offer a wide array of features to increase efficiency and maximize operator comfort!Vibration Dampening Side app shotHandle Specially designed to reduce vibration transfer to operator. Removable for left or right hand use. Rotational Exhaust System Rotates a full 360 degree to ensure that exhaust is directed away from operator.
  • Cast Aluminum Construction Tool housing and handle made of solid cast aluminum. Safety-Lock Throttle Lever Prevents accidental start-up of tool. Lever has no sharp edges or pinch-points.
  • Wick-Lube System for Longer Gear Life extends gear life with simple lubrication. All models include Gear Oil and Gear Oil Gun. Insulated Throttle Handle Reduces cold air transmission to operator's hand. Handle position is adjustable, increasing comfort and efficiency.
  • Robust 1.3 hp Air Motor 1.3 hp (970 W) governor-controlled air motor delivers powerful, efficient performance. Convenient Spindle Lock Allows quick and easy change of grinding wheel or abrasive disc. Less downtime!
image

7" (178 mm) Dia. Vertical Disc Sander
Model No. 53251

2 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8"-11 Female Pad

  • Dynabrade 7" (178 mm) Dia. Vertical Disc Sanders are ideal for grinding on these materials or applications; Sheet Metal, Fiberglass, Composites, Carbon Fiber Sand, Deburr Metal Parts, Surface Condition, Remove Mill Finish Finish Aluminum, Remove Paint & Rustapp shot.
  • Governor-controlled air motor maintains tool RPM under heavy load. Overspeed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less downtime.
  • Insulated tool handle minimizes cold air transmission to the hand. Handle position is adjustable for operator comfort. All models include safety-lock throttle lever. For peak performance, use of optional 95870 Air Hose-1/2" (13 mm) diameter is recommended.
  • Each model includes 50283 Backup Pad, 7" (178 mm) in diameter. Covers more area in less time! Pad accepts 7" (178 mm) diameter abrasive discs with 7/8" (22.23 mm) center hole, sold separately.
image

Die Grinders & Disc Sanders

image

Disc Sanders

 


  • DYNAFILE®

  • DYNAFILE® II

  • MINI-DYNAFILE® II

  • DYNAFILE® III

  • DYNABELTER®

  • DYNANGLE II

image

Dynafile Abrasive Belt Tool
Model No. 14000

.5 hp, Straight-Line, 20,000 RPM, Front Exhaust, for 1/8"-1/2" W x 24" L (3-13 mm x 610 mm) Belts

  • World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more!
  • Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone.app shot
  • Tool includes 11218 Contact Arm for standard use. Also accepts a variety of additional Contact Arms. Superior belt tracking permits use of abrasive belts 1/8", 1/4" or 1/2" wide x 24" long. Work in areas as small as 3/8" diameter.
  • Motor easily adjusts to the most comfortable throttle lever position. Lightweight composite belt guard allows quick and easy belt change!
  • Hard and soft platen pads mount onto Contact Arms for heavy grinding or contour polishing.

image

Dynafile II Abrasive Belt Tool
Model No. 40320

.5 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4"-3/4" W x 18" L (6-19 mm x 457 mm) Belts

  • Grind, deburr, blend and polish, on metal, plastic, fiberglass, composites, rubber, glass and app shotmore. Grind from contact wheel or platen pad; finish and polish using slack of belt.
  • Tool includes 11206 Contact Arm for 3/4" wide x 18" long abrasive belts.
  • Lightweight, ergonomic 7 degree offset design. Grinding head pivots 360 degrees for securing in most efficient position.
  • Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.

image

Mini-Dynafile II Abrasive Belt Tool
Model No. 15003

.4 hp, 7 Degree Offset, 25,000 RPM, Rear Exhaust, for 1/8"-1/2" W x 12" L (3-13 mm x 305 mm) Belts

  • Ideal for strap polishing and working in narrow openings. Tool includes 15026 Contact Arm for 1/2" wide x 12" long abrasive belts and 15118 Drive Wheel.app shot
  • Lightweight ergonomic design handle features 7 degree offset. Multi-position grinding head pivots 360 Degree.
  • Belt guard easily detaches for quick abrasive change; simple belt tracking adjustment knob.
  • For added versatility, tool can be easily converted to Die Grinder with optional 01644 (1/4") Threaded Collet Insert.
  • 40378 Rubber Drive Wheel may be ordered separately, for efficient use with optional non-woven nylon belts.

image

Dynafile III Abrasive Belt Tool
Model No. 15300

.7 hp, 7 Degree Offset, 20,000 RPM, Front Exhaust, for 1/4"-1" W x 18" L (6-25 mm x 457 mm) Belts

  • Excellent for grinding welds, blending and deburring. Dynafile III Abrasive Belt Tool offers all the versatility of our world-famous Dynafile II, while serving up more power (.7 hp / 522 W) for faster material removal.app shot
  • Tool includes high-efficiency Rubber Drive Wheel, ideal for use with all abrasive belts.
  • Includes 15350 Contact Arm for 1" wide x 18" long abrasive belts. Tool grinding head pivots 360 degrees.
  • Soft grip handle assembly allows operator to apply additional force to contact wheel. Handle also offers enhanced control and maneuverability.
  • Optional safety-lock throttle lever is available.

image

Dynabelter Abrasive Belt Tool, Standard Duty
Model No. 11475

.7 hp, 7 Degree Offset, 18,000 RPM, Front Exhaust, for 1/4"-1" W x 30" L (6-25 mm x 762 mm) Belts

  • For weld grinding, blending and finishing, on metal and other surfaces. Dynabelter is ideal for work on ferrous and non-ferrous metals, wood, plastic, stone and composites. app shot
  • Uses include grinding cylinders, deburring castings, cleaning welds and fabricating metals. Also excellent for polishing tubing, deburring structural steel, finish-dimensioning on lathe work and blending inside corners. Safety-lock lever throttle included.
  • Standard Duty, .7 hp model accepts 1" wide x 30" long abrasive belts. Adjustable speed; removable side handle.
  • Includes 11681 Contact Arm Assembly.
  • Ideal for use with 1/4" Dynaswivel , and 95676 Coupler/Plug Assembly.

image

Dynangle II Abrasive Belt Tool, Single Motor
Model No. 14300

1.2 hp, Straight-Line, 13,000 RPM, Rear Exhaust, for 2" W x 34" L (51 mm x 864 mm) Belts

  • Polish, grind contours and flats. Surface conditions stainless steel and most other metals. Also used on wood, plastic, fiberglass and composites. Blends and finishes solder seams. Built-in abrasive belt guard; fast belt change.app shot
  • Single Motor model uses 2" x 34" belts; belts spans 11-1/2" for 'strap polishing' up to 36" diameter pipe.
  • 14350 Conversion Kit available to upgrade single motor model to a dual motor model at a later date, if desired.
  • Safety-lock lever-throttle; hanger brackets included for optional overhead suspension.
  • For grinding with a platen pad, dual motor models are recommended.

Do you have a question or need application assistance?