1-800-334-1001

 

Email Us Credit App Repair Form

Menu

STATIONARY EQUIPMENT - DYNABRADE

  • BENCH & PEDESTAL BELT GRINDERS

  • BENCH & PEDESTAL DISC GRINDERS

  • VERSATILITY GRINDER

  • TOOL POST GRINDERS

  • SUPERFINISHER


image67900 THREE WHEEL BELT GRINDERmade in usa

Ideal for a variety of applications, including grinding, deburring, finishing, shaping, fitting, plus removing flash and parting lines

  • Powers abrasive belts that are 2" wide by 60" long (51 mm x 1,524 mm).
  • Machine design allows smooth grinding from contact wheel, and sanding or finishing from slack of belt.
  • Offered in complete range of electrical configurations.
  • Amazing versatility – grind from contact wheel or platen; finish from slack of belt.
  • Fully guarded to meet all OSHA standards. pedestal stand
  • Work rest is adjustable to ensure accurate angle grinding.
  • Quick and easy belt change minimizes downtime and increases efficiency.
  • Can be bench-mounted or attached to optional 67500 Pedestal Stand, as shown here to the right. Pedestal Stand offers height adjustment of 28" (711mm) to 38" (965), with capacity up to 300 lbs. (136 kg)
  • Optional 67965 Vacuum Scoop also available, for efficient capture of dust and debris.
Please note: Other models and sizes available. To inquire, select the Consult an Expert button below and complete the form.

image67600 BENCH & PEDESTAL DISC GRINDERmade in usa

Ideal for a variety of applications, including grinding and deburring castings or fabricatedparts as well as shaping, flat grinding and contouring on metal, wood and plastic.

  • Powers abrasive discs 12" (305 mm) in diameter.
  • Machine design allows quick disc change, and easy adjustment of work table for optimum efficiency.
  • Offered in complete range of electrical configurations.pedestal stand
  • Adjustable work table with miter ensures accurate angle grinding. Runs in forward and reverse modes.
  • Fully guarded with adjustable work rest to meet all OSHA standards.
  • Quick and easy disc change minimizes downtime and increases efficiency.
  • Can be bench-mounted or attached to optional 67500 Pedestal Stand, as shown. Pedestal Stand offers height adjustment of 28" (711 mm) to 38" (965 mm), with capacity up to 300 lbs (136 kg).
Please note: Other models and sizes available. To inquire, select the Consult an Expert button below and complete the form.

image64900 VARIABLE SPEED VERSATILITY GRINDERmade in usa

Ideal for use on castings and forgings, turbine blades, medical implants, investment castings and more.

  • Powers 72" abrasive belts in widths from 1/4" to 2", to provide a wide variety of finishing solutions.
  • Adjustable air belt tensioning provides constant control.
  • Pivoting arm assembly for operator comfort.
  • Unit includes efficient through-housing 4" vacuum port for dust control with optional vacuum scoop (64932).

 

Please note: Other models and sizes available. To inquire, select the Consult an Expert button below and complete the form.

image65750 ELECTRIC TOOL POST GRINDERmade in usa

Mounts to Standard Lathes, for Applications from Grinding to Superfinishing

  • Model features air-powered belt tensioning.
  • Model features fixed speed for faster cutting.
  • Easily accessible belt tracking and tensioning adjustments.
  • Coolant nozzle with adjustable flow valve.
  • Easy to dress contact wheel.
  • Machine has water-tight on/off switch, and built-in ammeter for measuring motor load.
  • 90 durometer, fixed 66619 Contact Wheel is standard.

 

image66402 AIR TOOL POST GRINDER

Mounts to Standard Lathes

  • For use on metal, glass, stone, rubber, ceramic, carbide composites and other hard to grind materials.
  • Simple tool holder mounting. Holds close tolerances.
  • Reduce surface finish on materials prior to a superfinishing process.
  • In-line belt tracking prevents uneven belt stretching, as found on conventional belt tracking arrangements.
  • Fingertip controls for both motor on/off and adjustable air-belt tensioning.
  • Cutaway housing design allows working into workpiece shoulders from right to left.
Please note: Other models and sizes available. To inquire, select the Consult an Expert button below and complete the form.

image64000 SUPERFINISHER - (Available in 115 or 230 volt)made in usa

Consistently attain repeatable finishes with this versatile new machine.

  • With abrasive feed speed adjustable from 1 1/2" (38.1 mm) to 1/16" (1.6 mm) per minute, even diamond abrasives can be fully utilized.
  • With changeable contact wheels with widths of 1" (25.4 mm), 2" (50.8 mm), 3" (76.2 mm)or 4" (101.6 mm) and several contact wheel durometers, this machine can cover a wide variety of applications.
  • 5" diameter contact wheel allows for up to 2" (50.8 mm) shoulder clearance for getting into tight corners.
  • Machine mounts easily to lathe in less than 5 minutes, using a mounting bracket with a ground face. Once the bracket is indicated off the work piece, mounting the Superfinisher puts you very close to final setup.
  • The unit and the control box can be built for front or back of the lathe, with an optional 15' (4.5m) pendant for remote mounting of the control box.
  • The contact wheel oscillation can be adjusted from 15 cycles per second down to 0, giving the operator control over the process.
  • No tools are needed to change abrasive rolls, and this simple procedure can be done very quickly.
  • An hour meter allows operator to schedule maintenance.
  • The unit has a precision air regulator, giving the operator repeatable control over the contact wheel pressure against the work piece.
Please note: Other models and sizes available. To inquire, select the Consult an Expert button below and complete the form.

Do you have a question or need application assistance?