How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate
How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate
Equipment Utilized – Binks Dual Regulated Pressure Pot + Devilbiss Compact Trans Tech Spray Gun with 1.4mm Fluid Needle
Ist Regulator is for Pot Fluid – ie. Outbound fluid pressure. A good starting point for outbound fluid pressure is 10 lbs.
2nd Regulator is for spray gun atomization air. A good starting point for spray gun atomization air is “double” that of starting fluid pressure.
In order to set your outbound spray gun atomization air, you MUST set using dynamic air pressure (ie. With the gun trigger depressed). When setting fluid flow rate – ultimately this is determined by production demands, but in most cases your fluid stream should be between 6-12 inches from the end of a gun.
Thanks for Watching! Please Like, Share, and Subscribe to our channel!
Find us online!
Facebook: www.facebook.com/AirPowerUSA
Twitter: twitter.com/Air_Power_Inc
LinkedIn: www.linkedin.com/company/206581
