Posts

Echa un vistazo a lo que se está cocinando en México

As the summer heat is beginning to increase so is our Monterrey, MX team.  These past few months have been full of exciting product launches, customer trade shows, and strategic partnership meetings.  Our facility, located just outside of Monterrey, in Apodaca, consists of eight (8) employees’ within a 308 sq. meter (3,315 sq. ft.) branch location.  This branch functions as a complete team offering: account management, technical service, field repair, bench repair, system startup and integration, training, and localized equipment stock.

Air Power Mexico Team

John Deere Paint Summit

Our team was honored to attend the John Deere Paint Summit as a strategic supplier for Deere within Mexico and the United States.  This global summit included members from China, India, Brazil, Argentina, Canada, and the United States.  It was a privilege for Air Power to be in attendance but more importantly a complement to be asked to be a part of the presentations.  In partnership with Graco and St. Clair Systems, Air Power discussed the importance of paint kitchen visibility and viscosity control as it pertains to plural component finishing operations.

APMX Presentation

 

FABTECH Monterrey

Following the Global Summit, there was no time to waste in preparation for Fabtech, Monterrey.  Held in Monterrey, MX on May 7th-9th; this event featured over 1,000 participants and more than 50 industrial vendors.  This offered for an engaging and technology advancing manufacture fair.  Air Power in partnership with Heraeus and Nitto Systems meet over 100 clients interested in further improving their current finishing operations.

APMX at Heraus Event

 

Gema OptiFlex Pro Series Launch

Mexico City was the next stop as excitement continues to build over the launch of GEMA’s new OptiFlex Pro Series of powder coating equipment.  This launch event highlighted the units unsurpassed Power, Quality, and Control Features.

Gema OptiFlex Pro Series Launch

 

  • Power – Powerboost Technology of 110KV
  • Quality – Precise Chare Control (PCC) and redesigned powder pump
  • Control – Bluetooth Capabilities with the GEMA E-APP

 

The below video, presented by GEMA, highlights the advantages of the new OptiFlex Pro.

 

 

Graco New Product Launch

Most recently, the team joined Graco in San Diego, CA, for the New Product of 2019 Launch.  This event focused on new technology and product that Graco is implementing within the 2019 calendar year.  Including highlights of:

  • Intelligent Paint Kitchen for Pneumatic Pumps
  • New Pro XP Gun Models
  • Radial Piston Agitators
  • Sealed 4-Ball Lower Plus
  • Active Surge Suppressors
  • Pro-Dispense
  • ProControl 1KE

This completes the New Product Launch 2019 for Graco and Air Power had representation within the Atlanta, Indianapolis, and San Diego event locations.

It’s cooking down in Mexico and we are excited of what is next to come.  If you are familiar with Air Power and have locations within Mexico; please give us a call today. We would appreciate the opportunity to further discuss best practices, equipment standardization, and our system integration capabilities and advantages offered as a result of our unsurpassed coverage area between the United States and Mexico.

 

 

Save Time and Paint with ProDispense

Manufacturing facilities utilize various types of coatings, some of which are two component paint.   These formulas must be mixed properly in order to properly adhere and perform in the field as designed.  This case study highlights a solution that allowed the customer to maintain tight paint ratios, minimize waste, and remove hand mixing from the process.

Customer

A leading manufacture within the truck and bus industry located in North Carolina.

Challenge

This truck and bus manufacturing facility has multiple paint booths due to their high volume, high quality, and high standards associated with the paint application.  They use a two component primer and paint, and have to maintain automotive quality finish on their production line.  The main paint line utilizes a Graco Proportioning System to dispense on ratio paint to operator; however the offline paint repair/touch up facility still relied on manually mixing (or “hot potting”).  Hot potting tended to be very wasteful as the paint mixed wasn’t always sprayed prior to gelling, or the two parts were mixed off ratio causing imperfections within the finish aesthetics and quality.  Due to hot potting the general work area was considered “messy” as operators were physically hand mixing paint and catalyst out of drums.

Air Power’s Solution

Air Power in partnership with Graco, proposed a solution utilizing the Graco ProDispense platform of product.  This proportioning solution allows the offline operators to mix exactly how much they need for each application on ratio every time. There is no guesswork when it comes to material being mixed or how much is needed, and the work area is self-contained with little to no mess. The offline paint process has become streamlined as the paint operator only has to know how much paint he needs (in liters) and what color.  They select the desired paint volume and color from a custom touch screen user interface. Once selected the exact amount is dispensed and mixed into the paint applicator.  The operator then removes the paint applicator and performs the associated painting task.

Result

Operators are no longer mixing paint by hand.  This alone has saved the company time and money due to costly mistakes associated with the hand mixing process.  The waste output has been reduced due to the ability to accurately and repeatedly meter, mix, and dispense the exact volume of paint in which the operator needs on time and on ratio.  Aesthetically the workspace is much cleaner.  An added benefit to management is the ability to now view, track, and have visibility of paint usage, due to the ProDispense reporting capabilities, within an application which historically has had none.  Allowing for better ontime tracking, shipment, and forecasting.

 

 


 

Graco’s ProDispense is a cost-effective and user-friendly electronic system that dispenses preset amounts of fluids. The ProDispense system allows durable goods manufacturers to quickly and accurately fill cavities with oil, grease, water, or other industrial fluids in assembly line environments where accurate dispensing is essential. ProDispense can deliver up to eight different fluids at multiple dispense points, and accurately measure volume.

  • Consistent fluid dispense
  • Reporting capability tracks volume and usage
  • Easily connects to PLC and barcode scanners
  • Return on investment assures that ProDispense quickly pays for itself
  • User interface provides simple operation and data entry
  • Local or integrated control
  • Manual or automatic dispense
  • Tracks dispense results for process verification

 

 

 

 

 

Goodbye to Manual Mixing

Introduction

This customer manufactures underground boring equipment for gas and water lines. They used “hot potting” or manually mix 2 paint components to spray two colors: yellow and black.

Background

This company has one booth for top coating and would manually mix the black and yellow paints. It took well over an hour to change out the colors. The parts being fabricated were staged all over the plant waiting to be painted. Due to backlog and space contingencies, some items were stored outside. Rainy days would slow down the process even more.

Air Power Solution

Air Power’s solution recommended using a Graco Promix 2KE with gun flush box and using drum pumps they already had. Mixing on demand out of a 55-gallon drum of each component, improved the ability to change colors in less time than it takes to bring a new part to be coated.