Posts

Personal Protective Equipment (PPE) : Outside the Body

 

 

Taking care of both the inside and the outside of your body in the workplace is critical. In this video, Air Power Application Specialist Travis Stirewalt and Account Manager Eddie Rhodes, talk about the importance of Personal Protective Equipment and how to choose the right PPE for your application. Whether you are dealing with HAZMAT, VOC’s or nuisance dust, taking care of your skin, bones, and internal organs are vitally important to staying healthy. Stay tuned as we look to help you maneuver through PPE basics.

 

Learn More about the brands mentioned:

Bullard

Binks

 

 

Personal Protective Equipment: Inside the Body

 

 

Personal Protective Equipment: Inside the Body

 

Taking care of both the inside and the outside of your body in the workplace is critical. Whether you are dealing with HAZMAT, VOC’s or nuisance dust, taking care of your skin, bones and internal organs are vitally important to staying healthy. In this Air Power Video, we look to help you maneuver through Personal Protective Equipment (PPE) basics.

Lee Patterson Co. Virtual Tour

 

 

 

Lee Patterson Co. Virtual Tour

 

Air Power Manufacturing Solutions recently acquired Lee Patterson Co. in 2019. This location now serves as our Orlando, Fl branch location. Here is a brief introduction of Lee Patterson Co. Air Power now has the capabilities to provide our ASSEMBLE, MOVE, and COAT services in the Florida area!

 

 

Improving Your Electrostatic Process

Improving Your Electrostatic Liquid or Powder Coating Process

 

In this video, Air Power Specialist Travis Stirewalt and Account Manager Eddie Rhodes, share tips about improving your electrostatic process. Learn how to improve your electrostatic process with expert advice for powder coaters and liquid painters. Discuss best practices that help you put more powder or paint on your parts and less in your filters or the paint booth floor. What does this mean for you? Higher transfer efficiency and less paint (money) wasted by increasing your first pass transfer efficiency. Video from the Air Power, Inc. Chattanooga Branch.

Carlisle Product Training

Carlisle Fluid Technologies Product Training

 

Air Power took a trip to the Carlisle Fluid Technology facility to get the full Carlisle Product Training experience. Carlisle offers an array of industrial spray finishing solutions. Our team spent the day learning about all their products, usage and maintenance tips to help our customers keep their equipment in good condition. Thanks to Carlisle for having our team in to visit!

 

Learn More about Carlisle

 

How To Effectively Adjust Your Spray Gun Pattern

 

How To Effectively Adjust Your Spray Gun Pattern

 

This video is a step by step guide to show you how to effectively adjust your spray gun pattern. The equipment utilized for this video is the Devilbiss Spray Gun with 1.4MM Needle (standard).

The Fan adjustment (top knob) – clockwise adjustments to narrow pattern, counterclockwise adjustments for wider pattern.

The Needle adjustment (bottom knob) – for fine tuning of fluid flow rate

Air Power recommends that all fluid flow rate adjustments take place on your outbound fluid pressure regulator. By regulating fluid utilizing the fluid needle it will increase needle wear and result in decreased life expectancy. Properly setting your outbound fluid at your fluid source (pressure pot, pump, etc.) utilizing a properly set outbound fluid regulator is the preferred and most effective fluid setting measurement.

Please Like & Subscribe to our Youtube channel to stay updated on our How To video series. Thanks for Watching!

How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate

How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate

 

Equipment Utilized – Binks Dual Regulated Pressure Pot + Devilbiss Compact Trans Tech Spray Gun with 1.4mm Fluid Needle

Ist Regulator is for Pot Fluid – ie. Outbound fluid pressure. A good starting point for outbound fluid pressure is 10 lbs.
2nd Regulator is for spray gun atomization air. A good starting point for spray gun atomization air is “double” that of starting fluid pressure.

In order to set your outbound spray gun atomization air, you MUST set using dynamic air pressure (ie. With the gun trigger depressed). When setting fluid flow rate – ultimately this is determined by production demands, but in most cases your fluid stream should be between 6-12 inches from the end of a gun.

Thanks for Watching! Please Like, Share, and Subscribe to our channel!

Find us online!
Facebook: www.facebook.com/AirPowerUSA
Twitter: twitter.com/Air_Power_Inc
LinkedIn: www.linkedin.com/company/206581

Air Power Attends BHP Chamber of Commerce 2019 Membership Awards Celebration

Air Power Manufacturing Solutions was invited to the BHP Chamber of Commerce 2019 Membership Awards Celebration held on Tuesday, February 19th. The event was held over lunch at the beautiful High Point Country Club. The 2019 Membership Awards Celebration is an annual event held by the Business High Point Chamber of Commerce. This event is the Business High Point Chamber’s opportunity to recognize all the people who make their organization great.

The celebration kicked off with a welcome from the President and CEO of the BHP Chamber, Patrick Chapin. The welcome was followed by a short prayer led by Reverend Dr. Frank Thomas of Mt. Zion Baptist Church of High Point. Thereafter, we heard a brief message from the Sponsor of the event, Phillip Morgan of Piedmont Natural Gas. Lastly, there was an address from the BHP Chamber Chairman David S. Congdon, CEO of Old Dominion Freight.

Congratulations to All the Winners and Nominees

 

We’d like to thank the Business High Point Chamber of Commerce for recognizing Air Power Manufacturing Solutions for reaching our 50 year milestone. We would also like to congratulate the nominees and following winners:

Small Business of the Year – Northwood Animal Hospital

Business of the Year – Bethany Medical Center

Minority-Owned Business of the Year – Karma Contracting

Community Organization of the Year – Bobby Labonte Foundation

Young Professional of the Year – Cyril Jefferson of Communities in School

President’s Award – Christi Barbour & Christi Spangle of Barbour Spangle Design

Volunteer of the Year – Eric Abeles, 2019 Co-Chair of Leadership High Point

Vision Investor of the Year – Mark A. Norcross of X8 Aviation

Distinguished Citizen of the Year – Robert G. Culp III