Posts

Monti 3D Powder Coat Line Walkthrough

/in , , , , /by

 

Monti 3D Powder Coat Line Walkthrough

 

Air Power Manufacturing Solutions teamed up with GAT Finishing Systems, Rohner Powder Coating Booths and Gema Powder Application Equipment to create a unique automated powder coat line that can process large and small parts quickly and efficiently. Monti Inc’s new powder coat line was built with quality results in mind, with the capabilities to meet the strictest specifications.

This new 20,000 sq. ft. powder coating facility is located in Greenwood, SC. This powder coat system has been tested to exceed 1,000-hour salt spray, tested per ASTM B117 meeting requirements of UL-1332 including ASTM D7091-05, D1654-08, D610-01, D714-02. This automated powder coat line can handle parts up to 2 ft x 4 ft x 8 ft. The batch powder coat system can handle parts up to 8 ft x 8 ft x 14 ft. Either line can paint any color. The system currently has lots of capacity to offer. With regard to throughput, it paints a 1-3/4” X 7” part and can powder coat and package 36,000 of these during 1 shift.

Monti Powder Coat Line

 

Source: Monti Powder Coating

How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate

/in , , , , , , , /by

How To Properly Set Up A Binks Pressure Pot and Spray Gun Fluid Flow Rate

 

Equipment Utilized – Binks Dual Regulated Pressure Pot + Devilbiss Compact Trans Tech Spray Gun with 1.4mm Fluid Needle

Ist Regulator is for Pot Fluid – ie. Outbound fluid pressure. A good starting point for outbound fluid pressure is 10 lbs.
2nd Regulator is for spray gun atomization air. A good starting point for spray gun atomization air is “double” that of starting fluid pressure.

In order to set your outbound spray gun atomization air, you MUST set using dynamic air pressure (ie. With the gun trigger depressed). When setting fluid flow rate – ultimately this is determined by production demands, but in most cases your fluid stream should be between 6-12 inches from the end of a gun.

Thanks for Watching! Please Like, Share, and Subscribe to our channel!

Find us online!
Facebook: www.facebook.com/AirPowerUSA
Twitter: twitter.com/Air_Power_Inc
LinkedIn: www.linkedin.com/company/206581